The biomass briquette machine (briquette press) is a key piece of equipment for compressing biomass raw materials (such as wood chips, straw, sawdust, etc.) into high-density fuel rods or charcoal briquettes. Properly setting up and debugging the equipment can not only improve production efficiency but also generate high-quality charcoal briquettes. This article will provide you with an easy-to-understand operation guide to help you quickly master the techniques of debugging the biomass briquette press and setting up the biomass briquette machine.

The global charcoal briquettes market size is RMB 15.041 billion in 2023 and is expected to reach RMB 24.779 billion in 2029, with a CAGR of 8.25% during the forecast period. The production process of charcoal briquettes is relatively simple, with small equipment investment and high production efficiency. A small set of charcoal briquettes production equipment can produce several tons of products per day, with considerable profits.

If your biomass briquette machine isn't producing good briquettes, don't worry, it might be due to the following reasons. Below are some practical troubleshooting and solutions to help you quickly resolve the issue:

The total cost of a complete biomass charcoal briquette production line is mainly up to raw materials and production capacity. Normally, the total cost will be 20,000-300,000USD roughly. If you are interested in this production line, please tell us your specific raw materials and the production capacity you expect, then we can make proposal for you, and quote shipping cost, installation and commissioning cost, etc.

Biomass material briquetting is a process to compress biomass material into solid briquette under high temperature and high pressure, and screw propeller is just the device to provide high pressure. For different raw materials, the suitable angle and thickness of screw can be a bit different. So we need to find the most appropriate angle and thickness of screw according to our specific raw materials, to produce the qualified briquettes with high density and strength.

We all know that the traditional processing steps of charcoal briquettes making is generally Crushing – Drying – Briquetting – Carbonizing, etc. which is a production method of carbonization after briquetting.

It is well known that all kinds of biomass materials can be used for making charcoal, such as wood logs, wood sawdust, rice husk, coconut shell, palm kernel shell, stalks, etc. As for different raw materials, the suitable process is different, and the properties of resulting charcoal will also be different. So, it is very important to choose the suitable ways based on different raw materials. Here are two ways of making charcoal from all kinds of biomass raw materials. The first one is Briquetting – Carbonizing. The second one is Carbonizing – Briquetting.