The biomass briquette machine (briquette press) is a key piece of equipment for compressing biomass raw materials (such as wood chips, straw, sawdust, etc.) into high-density fuel rods or charcoal briquettes. Properly setting up and debugging the equipment can not only improve production efficiency but also generate high-quality charcoal briquettes. This article will provide you with an easy-to-understand operation guide to help you quickly master the techniques of debugging the biomass briquette press and setting up the biomass briquette machine.
Here are some things to note when installing a biomass briquette machine. Based on many years of experience in biomass briquette technology, EP Machine will introduce you to the operation method.
- Check whether components such as the motor, transmission belt, pressure roller, and mold are intact and undamaged.
- Ensure sufficient lubrication to reduce equipment wear.
- Adjust the gap between the mold and the pressure roller based on the hardness and moisture content of the raw materials.
- If the equipment has a heating function, set the temperature between 150°C and 300°C.
- Adjust the hydraulic system or mechanical pressure according to the characteristics of the raw materials (generally set between 10-20MPa) to ensure the briquette density is appropriate.
- Run the equipment without load for 2-3 minutes to check for abnormal noises or vibrations.
- During the initial feeding, add a small amount of raw material (such as wood chips or straw) and observe the forming effect.
- If there is a problem with your briquetting equipment after using it for a while, please continue reading
By correctly setting up the biomass briquette machine and debugging the biomass briquette press, you can easily produce high-quality charcoal briquettes. Follow the above operation guide and regularly maintain the briquette press equipment to achieve efficient and stable production results. If you are looking for a practical and easy-to-operate biomass briquetting solution, Please coutacts us!
